Some maintenance tips about the blister machine

Some maintenance tips about the blister machine

With the rapid development of the blister industry today, the pressure of competition in the blister machine industry has gradually increased. In order to obtain considerable profits, the blister machine must be kept in a highly operating state at all times. Then under this kind of intensity work, the blister machine will also Tiredness, how to eliminate the fatigue of the blister machine and keep it in good working condition, this is what I will tell you next: the maintenance tips of the blister machine.

First: The cleanliness of the machine must be ensured, that is, after each work is completed (after the shutdown), the debris on the table and the debris in the machine must be cleaned up in time to keep the machine clean. Second: The core components of the entire transmission device of the blister machine are chains, bearings, and racks. Therefore, in order to maintain a good transmission state, it is necessary to frequently lubricate the above components with butter. Third: The oil level of the vacuum pump should be observed every day, and the vacuum pump oil should be replaced in time to ensure the normal use of the solenoid valve and cylinder, and ensure the smoothness of operation and mechanical accuracy.

Good blister products are inseparable from the excellent performance of the blister machine equipment, and the corrosion and wear of the equipment is a natural law and cannot be avoided. In this case, only through careful attention to the blister machine Maintenance to reduce unnecessary wear and tear, extend the life of the machine, and ensure product quality. We provide blister machine products, if you are interested in this, please take the initiative to contact us for more relevant information.
132132